---
title: "Flame Test Virtual Lab (3D) – Interactive Bunsen Burner Experiment | MolDraw"
url: https://www.moldraw.com/education/experiments/flame-test/
description: "Free 3D flame test virtual lab: light a Bunsen burner, open the air hole, clean a nichrome loop in HCl and test Li, Na, K, Ca, Sr, Ba and Cu salts. Cobalt glass, NIST emission lines and an unknown to identify."
lang: en
publisher: Scidart Academy
generated: 2026-11-22
---
[MolDraw](https://www.moldraw.com/) › [Virtual experiments](https://www.moldraw.com/education/experiments/) › Flame test

# Flame Test Virtual Lab (3D)

**In short:** a 3D Bunsen burner bench where you light the flame, open the air hole, clean a nichrome loop in HCl and test seven metal salts. Compare colours by eye, through cobalt glass and in a spectroscope, then identify an unknown.

Follow the prompt at the top: it always shows the next step. Pick salts from the tray at the bottom, or click the glassware on the bench. Drag to look around and scroll to zoom.

Loading the MolDraw virtual lab…

[MolDraw **Lab**](https://www.moldraw.com/)

Loading…

★ **0**

### Missions

1. Light the burner safely: light it straight after turning on the gas.
2. Get the hot blue flame by opening the air hole.
3. Clean the loop in HCl and burn it off until the flame shows no colour.
4. Discover all seven flame colours (+10 each).
5. Unmask potassium: look at KCl through the cobalt glass.
6. Tell the reds apart: view LiCl and SrCl₂ in the spectroscope.
7. Identify three unknowns in a row (+20 each, streak bonus).

### Score

★ **0** pointsUnknowns solved **0**Best streak **0**

Find all seven flame colours, then take on the unknowns in the **?** well. After two correct answers some unknowns come mixed with plenty of sodium, as real samples often are.

### Lab notebook

| Sample | Flame colour seen | Cobalt glass | Flame |
| --- | --- | --- | --- |
| Observations appear here when you take the loop out of the flame. |  |  |  |

## Flame colours and emission lines

The colour words are the ones used in exam specifications and lecture demonstrations. The wavelengths are the strongest visible lines of the neutral atom; the intensities compare lines of the same element only.

| Metal ion | Salt in the lab | Flame colour | Strong atomic lines (nm, in air) |
| --- | --- | --- | --- |
| Lithium, Li⁺ | LiCl | crimson | 670.79 (doublet 670.78 / 670.79), 610.37, 460.29 |
| Sodium, Na⁺ | NaCl | yellow | 589.00, 589.59 (the sodium D lines) |
| Potassium, K⁺ | KCl | lilac | 766.49, 769.90 (deep red), 404.41, 404.72 (violet) |
| Calcium, Ca²⁺ | CaCl₂ | orange-red | 422.67, 646.26, 643.91, 649.38 |
| Strontium, Sr²⁺ | SrCl₂ | red | 460.73, 640.85, 496.23, 548.08 |
| Barium, Ba²⁺ | BaCl₂ | green | 553.55, 649.88, 611.08 |
| Copper(II), Cu²⁺ | CuCl₂ | green | 521.82, 515.32, 510.55, 465.11, 406.26 |

Sources: flame colours of Li, Na, K, Ca and Cu: AQA, *GCSE Chemistry (8462) specification*, section 4.8.3, Chemical analysis ([aqa.org.uk](https://www.aqa.org.uk/subjects/chemistry/gcse/chemistry-8462/specification/subject-content/chemical-analysis)); Sr and Ba: University of Washington Department of Chemistry, *Lecture demonstrations: Flame tests* ([chem.washington.edu](https://chem.washington.edu/lecture-demos/flame-tests)). Wavelengths: J. E. Sansonetti and W. C. Martin, *Handbook of Basic Atomic Spectroscopic Data*, NIST Standard Reference Database 108, strong lines tables ([physics.nist.gov](https://physics.nist.gov/PhysRefData/Handbook/)).

Potassium's strongest lines lie at the deep red edge of vision, with a weaker pair in the violet, which is why its flame looks pale lilac and is easily hidden. The red, green and orange flames of calcium, strontium, barium and copper come partly from molecules such as metal hydroxides and chlorides that form in the flame, so their colour is not set by the atomic lines alone.

## How the flame test works

Heat from the flame excites electrons in the metal atoms to higher energy levels. As they drop back they release the energy as light. The energy gaps are fixed for each element, so each metal gives light of particular wavelengths, and the mixture of those wavelengths is the colour you see.

### The Bunsen burner

- **Air hole closed:** the gas burns with too little oxygen. Tiny soot particles glow yellow, the flame is tall and wavy, and it leaves soot. It is easy to see, so it is the "safety flame" to leave on when the burner is not in use.
- **Air hole open:** air mixes with the gas before it burns. The flame is shorter, roars, is pale blue with a sharp inner cone, and is much hotter. Use this flame for flame tests: it has almost no colour of its own.
- **Where to hold the loop:** just above the tip of the inner blue cone, in the edge of the flame, where the flame is hottest.

### Method

1. Wear eye protection. Tie back long hair.
2. Light the burner with the air hole closed, then open the air hole for a blue flame.
3. Clean a nichrome or platinum wire loop by dipping it in hydrochloric acid and heating it. Repeat until the flame shows no colour.
4. Dip the clean, moist loop into the solid salt.
5. Hold the loop in the edge of the flame and record the colour.
6. Clean the loop again before the next sample.

### Things that go wrong

- **Sodium everywhere.** Traces of sodium in a sample, on fingers or on the wire give a strong yellow that can mask other colours. In the simulation every sample carries a little sodium, just as real ones do.
- **Mixtures mask each other.** A bright colour hides a faint one. Look at potassium through cobalt blue glass, which absorbs sodium's yellow.
- **Dirty loop.** Residue from the last test mixes into the next colour.
- **Similar colours.** Lithium, strontium and calcium are all reds. A spectroscope tells them apart by their lines.

## Safety

- Hydrochloric acid is corrosive: wear goggles and wash spills off skin with water.
- Barium salts are highly toxic. Do not eat or drink in the lab, and wash your hands afterwards.
- Light the splint or striker *before* you open the gas tap. Gas that builds up first ignites with a sudden flash, as the simulation shows.
- Never leave a lit burner unattended; turn the air hole closed so the yellow flame is visible.

**Writing up the practical?** Draw the apparatus, the Bunsen burner and your results table in MolDraw, a free online chemical structure and lab diagram editor.

[Open MolDraw editor](https://www.moldraw.com/)

## Frequently asked questions

### Why do metal ions give coloured flames?

The heat of the flame excites electrons in the metal atoms to higher energy levels. When they fall back they give out light of particular wavelengths. Each metal has its own set of energy levels, so its own colour.

### Why use the blue flame and not the yellow flame?

With the air hole closed the flame is yellow because glowing soot gives off light of all colours. That yellow hides the colour of the salt. With the air hole open the flame is hotter and almost colourless, so the metal's colour shows clearly.

### Why clean the wire loop in hydrochloric acid?

Residue from the last test would colour the next flame. Dipping the loop in HCl and heating it removes the old salt. Repeat until the loop gives no colour in the flame.

### What is cobalt blue glass used for?

Sodium is in almost every sample and its bright yellow hides the faint lilac of potassium. Blue cobalt glass absorbs the yellow light, so the potassium colour can be seen through it.

### Can a flame test tell lithium from strontium?

Both give red flames, so by eye it is hard. A spectroscope separates them: lithium has a strong line at 670.8 nm, while strontium's strongest atomic line is at 460.7 nm.

## Related

[**Flame test worksheet**Printable questions with answers (PDF)](https://www.moldraw.com/education/materials/flame-test-worksheet/)[**Electron configuration calculator**Energy levels and orbitals](https://www.moldraw.com/tools/free-chem-tools/electron-configuration-calculator.html)[**Interactive periodic table**Groups 1 and 2, transition metals](https://www.moldraw.com/tools/free-chem-tools/interactive-periodic-table.html)[**Beer–Lambert law calculator**Absorbance and concentration](https://www.moldraw.com/tools/free-chem-tools/beer-lambert-law-calculator.html)[**Titration curve simulator**Another interactive practical](https://www.moldraw.com/tools/free-chem-tools/titration-curve-simulator.html)

Last updated: November 22, 2026
