MolDraw › Virtual experiments › Flame test

Flame Test Virtual Lab (3D)

In short: a 3D Bunsen burner bench where you light the flame, open the air hole, clean a nichrome loop in HCl and test seven metal salts. Compare colours by eye, through cobalt glass and in a spectroscope, then identify an unknown.

Follow the prompt at the top: it always shows the next step. Pick salts from the tray at the bottom, or click the glassware on the bench. Drag to look around and scroll to zoom.


Loading the MolDraw virtual lab…
MolDraw Lab

Loading…

★ 0

Missions

  1. Light the burner safely: light it straight after turning on the gas.
  2. Get the hot blue flame by opening the air hole.
  3. Clean the loop in HCl and burn it off until the flame shows no colour.
  4. Discover all seven flame colours (+10 each).
  5. Unmask potassium: look at KCl through the cobalt glass.
  6. Tell the reds apart: view LiCl and SrCl₂ in the spectroscope.
  7. Identify three unknowns in a row (+20 each, streak bonus).

Score

★ 0 pointsUnknowns solved 0Best streak 0

Find all seven flame colours, then take on the unknowns in the ? well. After two correct answers some unknowns come mixed with plenty of sodium, as real samples often are.

Lab notebook

SampleFlame colour seenCobalt glassFlame
Observations appear here when you take the loop out of the flame.

Flame colours and emission lines

The colour words are the ones used in exam specifications and lecture demonstrations. The wavelengths are the strongest visible lines of the neutral atom; the intensities compare lines of the same element only.

Metal ionSalt in the labFlame colourStrong atomic lines (nm, in air)
Lithium, Li⁺LiClcrimson670.79 (doublet 670.78 / 670.79), 610.37, 460.29
Sodium, Na⁺NaClyellow589.00, 589.59 (the sodium D lines)
Potassium, K⁺KCllilac766.49, 769.90 (deep red), 404.41, 404.72 (violet)
Calcium, Ca²⁺CaCl₂orange-red422.67, 646.26, 643.91, 649.38
Strontium, Sr²⁺SrCl₂red460.73, 640.85, 496.23, 548.08
Barium, Ba²⁺BaCl₂green553.55, 649.88, 611.08
Copper(II), Cu²⁺CuCl₂green521.82, 515.32, 510.55, 465.11, 406.26

Sources: flame colours of Li, Na, K, Ca and Cu: AQA, GCSE Chemistry (8462) specification, section 4.8.3, Chemical analysis (aqa.org.uk); Sr and Ba: University of Washington Department of Chemistry, Lecture demonstrations: Flame tests (chem.washington.edu). Wavelengths: J. E. Sansonetti and W. C. Martin, Handbook of Basic Atomic Spectroscopic Data, NIST Standard Reference Database 108, strong lines tables (physics.nist.gov).

Potassium's strongest lines lie at the deep red edge of vision, with a weaker pair in the violet, which is why its flame looks pale lilac and is easily hidden. The red, green and orange flames of calcium, strontium, barium and copper come partly from molecules such as metal hydroxides and chlorides that form in the flame, so their colour is not set by the atomic lines alone.

How the flame test works

Heat from the flame excites electrons in the metal atoms to higher energy levels. As they drop back they release the energy as light. The energy gaps are fixed for each element, so each metal gives light of particular wavelengths, and the mixture of those wavelengths is the colour you see.

The Bunsen burner

Method

  1. Wear eye protection. Tie back long hair.
  2. Light the burner with the air hole closed, then open the air hole for a blue flame.
  3. Clean a nichrome or platinum wire loop by dipping it in hydrochloric acid and heating it. Repeat until the flame shows no colour.
  4. Dip the clean, moist loop into the solid salt.
  5. Hold the loop in the edge of the flame and record the colour.
  6. Clean the loop again before the next sample.

Things that go wrong

Safety

Writing up the practical? Draw the apparatus, the Bunsen burner and your results table in MolDraw, a free online chemical structure and lab diagram editor.

Open MolDraw editor

Frequently asked questions

Why do metal ions give coloured flames?

The heat of the flame excites electrons in the metal atoms to higher energy levels. When they fall back they give out light of particular wavelengths. Each metal has its own set of energy levels, so its own colour.

Why use the blue flame and not the yellow flame?

With the air hole closed the flame is yellow because glowing soot gives off light of all colours. That yellow hides the colour of the salt. With the air hole open the flame is hotter and almost colourless, so the metal's colour shows clearly.

Why clean the wire loop in hydrochloric acid?

Residue from the last test would colour the next flame. Dipping the loop in HCl and heating it removes the old salt. Repeat until the loop gives no colour in the flame.

What is cobalt blue glass used for?

Sodium is in almost every sample and its bright yellow hides the faint lilac of potassium. Blue cobalt glass absorbs the yellow light, so the potassium colour can be seen through it.

Can a flame test tell lithium from strontium?

Both give red flames, so by eye it is hard. A spectroscope separates them: lithium has a strong line at 670.8 nm, while strontium's strongest atomic line is at 460.7 nm.

Related

Last updated: