---
title: "How to Draw Cage Molecules in 3D: Cubane, Adamantane and Coordination Cages | MolDraw Blog"
url: https://www.moldraw.com/blog/how-to-draw-cage-molecules-3d.html
description: "Step-by-step guide with screenshots: draw cage molecules such as cubane, adamantane, dodecahedrane and Pd₆L₄ coordination cages in true 3D, rotate them on the canvas and flatten them into a clean 2D figure in MolDraw."
lang: en
publisher: Scidart Academy
generated: 2026-10-31
---
# How to Draw Cage Molecules in 3D: Cubane, Adamantane and Coordination Cages

Published: 30 Oct 2026 · Author: Scidart Academy · Reading time: ~6 min

![Cubane drawn in 3D perspective with depth shading next to a Pd6L4 coordination cage on the MolDraw canvas](https://www.moldraw.com/blog/thumbs/cage-molecule-drawing.webp)

Cubane and a Pd₆L₄ coordination cage, both drawn in 3D perspective on the MolDraw canvas.

**Short answer:** Don't try to draw a cage as a flat projection by hand. In MolDraw, either place the cage from the **Library** (cards marked **3D** land on the canvas in true 3D), or draw its connectivity in 2D and press **3D Clean Up** (`Shift`+`Ctrl`+`D`). Then drag on the canvas to rotate it, and click **Flatten 3D pose** when you want a normal 2D figure for a paper or slide.

## Why cage molecules are hard to draw

Cubane, adamantane, dodecahedrane and metal–organic cages are three-dimensional by nature. On paper every bond has to be drawn as a projection: some bonds cross, the back of the cage hides behind the front, and a small mistake makes the cube look like a flat hexagon. Textbook figures solve this by picking a good viewing angle and making the far bonds lighter.

MolDraw does the same thing for you. It builds a real 3D geometry, shows it in perspective on the canvas with depth shading, and lets you turn it until the view explains the structure. You only decide the angle.

## Method 1: Place a cage from the Library (fastest)

### Step 1. Open the Library

![MolDraw editor with the Library button highlighted at the bottom of the left tool rail](https://www.moldraw.com/blog/images/cage-drawing/step1-library-button.webp)

① The **Library** button sits at the bottom of the left tool rail (tooltip "Library — R-groups, ligands, structures…"). On an empty canvas you can also click **Templates** on the start card.

### Step 2. Choose a cage marked 3D

![Library window, Structures tab, Polyhedra category selected, showing Cubane, Prismane, Adamantane, Dodecahedrane and Tetrahedrane cards each with a 3D tag](https://www.moldraw.com/blog/images/cage-drawing/step2-polyhedra-cubane.webp)

② In the **Structures** tab pick **Polyhedra**. ③ Click the **Cubane** card. Cards with a small **3D** tag are placed in 3D.

Cages are in several places:

- **Polyhedra:** cubane, prismane, adamantane, dodecahedrane, tetrahedrane.
- **Bridged Polycyclics**, **Organic & amine cages** (CC1, CC3 imine cages), **Strained hydrocarbons** (pentaprismane, diamantane, [1.1.1]propellane) and **3D Templates**.
- **Supramolecular** tab: coordination cages such as the Fujita Pd₆(TPT)₄ cage, Pd₂L₄, Fe₄L₆ and the Pd₄ square, plus catenanes and rotaxanes.

You can also type into **Search categories or templates…**, for example "adamantane" or "Fujita cage".

### Step 3. Click the canvas to place it

![Cubane placed on the canvas in 3D perspective; the 3D View tool, 3D Clean Up, Flatten 3D pose and Exit 3D buttons are highlighted; the 3D viewer on the right shows the same cube](https://www.moldraw.com/blog/images/cage-drawing/step3-cubane-placed-3d.webp)

The cube lands in 3D, with the back edges faded. ④ The **3D View** tool is already selected. ⑤ **3D Clean Up** is shown as active. ⑥ **Flatten 3D pose** and ⑦ **Exit 3D** appear while you are in 3D mode. The 3D viewer on the right shows the same pose.

### Step 4. Rotate it to the best view

![Cubane after dragging to rotate it, with the Fade slider and Depth taper button highlighted in the top toolbar](https://www.moldraw.com/blog/images/cage-drawing/step4-rotate-depth.webp)

Drag on the canvas to turn the cage. ⑧ **Fade** sets how strongly the back atoms fade; ⑨ **Depth taper** makes far bonds thinner, like a hand-drawn perspective figure.

Each drag is one undo step, so `Ctrl`+`Z` takes you back to the previous angle. Press `Alt`+`D` to switch depth shading on or off.

### Step 5. Flatten it into a 2D figure

![Cubane after Flatten 3D pose: an ordinary 2D drawing that keeps the chosen perspective view](https://www.moldraw.com/blog/images/cage-drawing/step5-flattened.webp)

After **Flatten 3D pose** the view you chose becomes an ordinary 2D drawing. You can add labels, colours and arrows, and export it as SVG, PNG or vector PDF.

If you would rather throw the 3D view away, click **Exit 3D**: the pose is dropped and the original drawing comes back. If a stereocentre cannot be shown correctly from the current angle, Flatten tells you so; rotate a little and try again.

## Method 2: Draw the cage yourself, then let 3D Clean Up fold it

For a cage that is not in the library, draw only the *connectivity*. It does not matter that the 2D sketch looks wrong or that bonds cross.

![A flat 2D sketch of cubane made from two squares joined corner to corner, with the 3D Clean Up button and the square ring tool highlighted](https://www.moldraw.com/blog/images/cage-drawing/step6-handdrawn-flat.webp)

A flat cubane sketch: ② two squares from the ring bar, joined corner to corner with the bond tool. ① Then press **3D Clean Up**.

1. Pick a ring from the **ring bar** at the bottom (square, pentagon, hexagon…) and click the canvas. For cubane, place two squares.
2. Choose the **single bond** tool and drag from each atom of one ring to the matching atom of the other to close the cage. Add bridges the same way (for adamantane, draw cyclohexane and bridge 1,3,5-positions with CH₂ groups).
3. Check the formula in the **Info** panel: cubane is C₈H₈, adamantane C₁₀H₁₆.
4. Press **3D Clean Up** in the top toolbar or `Shift`+`Ctrl`+`D`. MolDraw tidies the sketch, builds a 3D structure and switches to the 3D View tool.

![The hand-drawn sketch after 3D Clean Up: a correct 3D cube on the canvas with the 3D View tool highlighted, and the 3D model with hydrogens on the right](https://www.moldraw.com/blog/images/cage-drawing/step7-handdrawn-3d.webp)

After 3D Clean Up the sketch has become a real cube. ③ The 3D View tool is active, so you can drag to rotate it straight away.

**Keep drawing in 3D.** You can add atoms and substituents while the pose is shown. Press 3D Clean Up again to re-minimise the geometry: the orientation you chose is kept, and the new atoms settle into proper 3D positions.

![Adamantane in 3D perspective on the MolDraw canvas after 3D Clean Up](https://www.moldraw.com/blog/images/cage-drawing/adamantane-3d.webp)

Adamantane drawn as a cyclohexane with three CH₂ bridges, after 3D Clean Up.

## Large coordination cages

![The Fujita Pd6(TPT)4 coordination cage placed from the Supramolecular tab in 3D perspective, with coloured triazine panels; the 3D viewer on the right shows the full cage with hydrogens](https://www.moldraw.com/blog/images/cage-drawing/fujita-cage-3d.webp)

The Fujita Pd₆(TPT)₄ cage from the Supramolecular tab, placed in 3D with coloured panels.

Big metal–organic cages with 100+ atoms cannot be built reliably from a 2D sketch, so the library versions ship with a checked 3D model. Place them from the **Supramolecular** tab and rotate them exactly like cubane. To draw your own cage, start from a library cage and edit it, or build one corner (metal plus ligand) and use **Generate** to make rotated copies around a centre.

## Tips for clear cage figures

- **Avoid edge-on views.** Turn the cage until no two atoms sit on top of each other and no bond points straight at you.
- **Use depth cues.** A moderate Fade plus Depth taper reads well in print; switch them off for a clean line drawing.
- **Flatten last.** Add labels and colours after flattening, so they stay where you put them.
- **Check the 3D viewer.** The panel on the right shows the same geometry with hydrogens, for measuring distances or exporting a 3D file.

## Questions and answers

### What is the easiest way to draw a cage molecule?

Place it from the MolDraw Library. Cage templates such as cubane, adamantane, dodecahedrane and coordination cages are marked 3D and land on the canvas in true 3D perspective, ready to rotate.

### Should I draw cage molecules in 2D or 3D?

Draw the connectivity in 2D (it does not matter if bonds cross), then press 3D Clean Up (Shift+Ctrl+D). MolDraw builds a real 3D geometry, shows it in perspective and lets you rotate it, which is much clearer than a hand-drawn projection.

### How do I rotate the molecule on the canvas?

While a 3D pose is shown, use the 3D View tool (Alt+D) and drag on the canvas. Each drag is one undo step.

### How do I turn the 3D view into a normal drawing for a paper?

Click Flatten 3D pose. The current view becomes an ordinary 2D drawing you can label, export as SVG or PDF, or paste into Word and PowerPoint.

## Related guides

[Chair conformations](https://www.moldraw.com/blog/chair-conformation-newman-projection-guide.html) [Crystal View: unit cells in 3D](https://www.moldraw.com/blog/crystal-view-plugin-cif-unit-cell-3d.html) [Stereoisomers](https://www.moldraw.com/blog/stereoisomers-meso-compounds-guide.html) [Protein viewer](https://www.moldraw.com/blog/protein-viewer-plugin-pdb-3d.html)

Last updated: October 30, 2026